27W 24VDC LED Edge Light Bar For Backlit Fabric Light Box
The Lumening LED edge light bars, also called edge-lit LED modules, are specially engineered to brightly and spotlessly light up your beautiful backlit fabric light boxes.
This 27w cuttable LED edge Light bar is designed to be installed along the inner sides of both single-sided and double-sided backlit fabric light boxes. Equipped with high-power LEDs from CREE (or as customized), combined with high quality lenses, the light bar achieves excellent performance.
Description
Product features:
Quality Light source: This 27W LED Edge Light Bar, also known as edge-lit LED module, is equipped with CREE XLamp High Power LEDs, highly reliable and has excellent performance. Color temperature ranging from warm white to cold white available to choose from.
Optimized Light distribution: Redirected by high-transmittance PMMA optics, light from the LEDs is bound within the beaming angles of 9 degrees and 50 degrees perpendicularly, when lighting across 2 opposite sides, This light bar is able to brightly and evenly illuminate 100 cm to 250 cm of backlit fabric lightbox with no hot spots and shadows.
Great Thermal dissipation: High quality Aluminum PCB effectively conducts heat away from the LEDs, creating an ideal working condition for the LEDs and other electronic components over running hours.
Ideal Driving method: The light bar comes with an on-board constant current power unit that feeds the LEDs with fine-tuned and steady amps, optimizing the LEDs over all performance. The bar itself is driven by 24 Volt Direct Current power supply.
Easy Installation: The LED edge light bar is designed to install along the inner side of the light box’ aluminum frame by means of screws and nuts or heat-conducting adhesive tape that requires no professional skill.
Simple connection: Connection between light bars is plug and play with no restriction of polarity, completely straightforward and worry-free.
Dimmable: This edge light bar is dimmable with PWM dimmers, this function is optional.
Cuttable: This bar is cuttable every 3 LEDs to fit various lengths of light boxes.
Fully tested: Every light bar, or LED module, is a survivor from thorough and harsh aging test before shipping. Good quality is ensured.
Energy-saving: Power consumption of the product is up to 75% lower than conventional light box lighting with fluorescent tubes.
Parameters |
|
Power Consumption | 27W
customizable |
Working Voltage | 24V
DC |
Luminous Flux | 1800Lm
±5% |
Beam Angle | 9°×50°
or as required |
Correlated Color Temperature
CCT |
2500-7000K
as required |
Color Rendering Index
CRI |
75-85Ra |
LED Quantity | 9pcs
or as customized |
LED Brand | CREE XLamp LEDs
XT-E, XP-G, XP-E…as required |
PCB Type | Aluminum Backed |
LED Spacing | 55mm
or as required |
Dimensions | 495L×23W×15H mm
or as customized |
Length of Male Connector
with cable |
75mm
or as customized |
Length of Female Connector
with cable |
100mm
or as customized |
Check out other Lumening LED Edge light bars or Edge-lit LED modules other than this cuttable LED Side Light Bar